Lab Equipment

We provide Digital Floculator (Jar Tester) to our valued customers at reasonable prices.

Technical Specifications:

Features:

• Designed to provide progeny free distilled water easily
• Complete unit made of stainless steel
• Condenser can be opened easily for periodic cleaning
• The lid perfectly rest and get sealed inside the collar on head. of the tank which avoids loss of steam and jumping of lid
• Easy wall mounting no plumbing
• Easy replaceable heating elements
• Wide range of output

Technical Specifications:

We are a preeminent manufacturer, supplier and exporter of a broad spectrum of superior quality Kjeldahl Apparatus. The range made available by us comprises of best quality in international standards with perfect designing and high durability that are sourced from the most authentic vendors of the market. Offered at affordable prices, our product-line is applauded for its attractive sizes, perfect finishing and eminent durability.

 

Features:

 

• Superb Texture
• Very long lasting
• Customization done
• Durable
• Non-corrosive
• Easy to use
• Perfect design
• High durability
• Sturdy construction

Features:

• Advance design structure of M.S pipes with epoxy powder coating finish
• Heating box made of M.S/G.I duly finished in powder coated shade
• Control panel separately attached to the main housing
• Open type spiral heater fitted in porcelain plates
• Condenser rack made of brass- chrome- plated provided for circulation of water of condenser
• Energy regulator as a temp. controller
• Suitable for 500ml and 800ml cap. kjeldahl flask
• Operator of 230 volts

Technical Specifications:

Features:

• Most suitable for distillation apparatus for Petroleum Products
• The heater box made of stainless steel having glass window provided
• The heater box consist 1000 watts heater placed on adjustable jack to adjust the high if heater base to rest neck of the flask perfectly into condenser tube
• The heat supply to the electric heater is being controlled by solid state electronic watts controller having digital watts indicators
• The straight type condenser provided as per IP 123 specification
• Double walled condenser bath having inner chamber of stainless steel provided
• Choice of single unit having left hand operation or double unit having both side distillation heater box
• Selection of cooling bath having CFC free cooling system which has hermetically sealed compressor and digital temp. Controller

Utilizing forced air circulation, hot air ovens are used in laboratories to perform effect of ageingon various physical properties of any type of materials including yarns, fabrics and paper etc; inaddition, these forced air convection ovens are also used for high quality drying and bakingapplications in the field of laboratory, medical or biomedical and pharmaceutical and textileindustries, where fast heat up and consistent temperature are prime requisite. Often known as hotair circulating ovens, these units are fitted with blower or fan inside in order to distribute hot air(warm air) in every corner of the inner chamber. Physical properties of materials are analyzedbefore and after ageing in order to find out their suitability for specific applications.Our hot air oven systems offer continuous temperature up to 250 DegreeC and feature safe operation;allowing operators to worry-free perform their tests. Standard models are available from 22 litersto 300 liters volume; however, we can design and manufacture hot air ovens meeting customerprovided temperature range, sizes and capacities. There are various optional accessories that ourcompany can add on extra cost in order to make your working more comfortable. Undereconomical price, our hot air ovens deliver superior quality drying facilities.

• Item Code: SSE-12
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK
• Packaging Details: PACKED IN WOODEN CARRAT

Specification

u Designed specially biological oxygen demand (B.O.D ) determination and other application like serum studies enzyme assays and general incubation test

u Doubled walled construction Outer Chamber outer is 304 type stainless and finish inner S.S. 316 in GMP Model.

u Mirror Polished with epoxy powder coated shade

u A solid state temperature controller with digital indicator or choice for microprocessor based PID temp. controller with printer output

u An ambient sensing co- ordination provides easy to control any temperature range in ambient condition

u Equipped with hermetically sealed compressor , fan cooled condenser and over load

protected cooling system - CFC free cooling system

u Mechanical convection system (motorized blower) ensures even air distribution within the chamber

u High grade insulation between the chamber minimize the heat exchange

u A fully length inner glass door for easy visibility without disturbing temperature

u A key lockable insulated door having positive door gasket sealed door perfectly

u Temperature selection 5 DegreeC - 60 DegreeC accuracy +-0.5 Degreec . To work on 230 volts 50 Hz.

u 3 nos. removable S.S wire mesh shelves available with all models as a standard

• Item Code: SSE-70
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1-2 WEEK
• Packaging Details: PACKED IN WOODEN CARRAT

Features:

• Usable for viewing paper and thin layer chromatography
• G.I epoxy powder coated cabinet in regular Model
• 316L S.S cabinet with matt finish in GMP Model
• With enclosed long and short wave light sources
• Provides an enclosed viewing space which eliminates external light interference
• Cabinet features a special filter that absorbs UV energy before it reaches your eyes “optional”
• Use with ultra violet lamp for observing fluorescent effect on chronograph etc.
• Operates on 230 volts A/C

Automatic Bomb Calorimeter with Printer facility

• Item Code: NB-0755

UV Sterilizer

Inner Dimensions: 43x34x18.5 (LxDxH)

Cap: 30 Ltr

 This is used to sterilize Mobiles, Laptops, Vegetables, Eatables, Tiffins & Files. It kills the Virus, Bacteria and Pathogens in couple of minutes. It will be used in Hospitals, Corporate, Offices, Factories & Home

 

Inner Body: Made up of Stainless Steel (Reflective Finish)

 

Outer Body: Made up of MS Powder Coated Steel

• Delivery Time: Within Week
• Packaging Details: Packed in Corrugated 5 ply Box

Backed by the most reliable and trusted vendors, supplying us with high-grade basic material, we are able to offer Digital PH Meter to our esteemed customers. These products are manufactured and designed by experienced professionals along with advanced machinery. These products are widely known for its durability and design.

 

Features:

 

• Easy to operate
• Low maintenance
• High performance
• High durability
• Precise design

 

Specifications:

 

• Rugged portable meter for routine PH measurements
• Easy to read RED” LED” display – 3 ½ digit
• Range :PH 0.000 to 14.00 ph mv: 0 to 1999 mv
• Solid ±0.01 PH readability and MV readability and MV readability 1 MV
• Temp. compensation :manually , adjustable setting on calibrated dial between 1c to 100c
• Auto mode compensation in ATC model
• Input impedance: 10/12 ohms

We deal in best quality scientific equipments all across world also we ensure all variety of scientific glass equipments 

Specification

u Bath designed for studies on Tissue metabolism, Enzymes and Protein coagulation & experiments requiring Shaking of subject matter at constant speed under controlled temperature environment.

u Double walled construction, Argon welded Leak proof Inner tank made of Stainless steel -304 Grade & Exterior made of MS Powder coated finished.

u Inner tank made of Stainless Steel - 316 grade and Exterior of Stainless Steel - 304 grade in GMP MODEL.

u High density glass wool insulation to prevent heat loss & ensure constant temperature.

u Hinged Pyramid shape lid provided avoids Evaporation of water and makes condensed water to fall back in the bath.

u Shaking tray consist of Lotus clamps to hold Erlenmeyer flasks.

u Shaking mechanism comprises of Variable speed PMDC geared motor fixed on right side & coupled to the shaking tray which shakes linearly.

u Shaking Stroke 50 mm.

u Shaking speed can be controlled by means of Electronic Speed Controller cum Digital RPM Indicator between 50 RPM to 150 RPM.

u Temperature controlled by Dual Display Microprocessor based PID Temperature controller & PT - 100 Sensor.

u Temperature Range - 5^oC above ambient to 95^oC.

u Temperature Accuracy + 1^oC or better.

u Operates on 230 Volts AC Single phase 50 Hz.

• Item Code: SSE-9
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK

Specification:
Double walled inside made of Stainless Steel 304 qlty. and outside of mild steel sheet.
The gap of 75mm between two walls is filled with pure mineral wool.
See through lid provides complete visibility minimizing the need to open the chamber.
Rapid air circulation produces quick temperature equilibration and recovery whenneeded.
Maintenance free & shock resistant.
The temperature is controlled by microprocessor electronic digital temperature indicatorcum controller form 5 DegreeC above ambient to 60 DegreeC +/- 0.5 DegreeC.
It has maximum orbital shaking speed up to 220 RPM with electronic digital timer havingsettable range upto 999 minutes. RPM Meter is also fitted in the control panel to checkthe speed of rotation.
Provided with temperature alarm system on temperature deviation with adjustablehigh/low alarm values.
This shaker has clamp of 3000 ml flask maximum, conical flask for 4 nos 250 ml. conicalflask for 8 nos and 100ml. conical flask to accommodate 4 nos & Test Tubes.
Provided with data logging facility with printing system
Provided with stationery shelf with adjustable height.
This shaker Incubator works on 220 V.A.C. 50 hz.
This is supplied with connecting cord. & plug.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK
• Packaging Details: PACKED IN WOODEN CARRAT

Specification

SSGW Fume Exhaust Hoods are designed to contained and exhaust toxic, Obnoxious or otherwise harmful gases, vapors, mist etc. to protect personal and equipment. A motor driven blower creates negative pressure with in the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air flow drawn from inside the laboratory which is used effectively for through sweep-out of work chamber.

The standard featured of SSGW Fume Hood are

Inbuilt centrifugal blower unit

Fluorescent tubes with safety electrical

Internally Located Electric Plugs.

Gas, Vacuum & Air Connections

Counter balanced Sliding up & Down front sash (door)

Utility chamber or storage unit beneath the fume hood unit to keep utility material such as Glassware, Material handling equipment and accessories with storage capacity starting from approx. 400 Litre area upto 1200 Ltr Approx. (optional)

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK

With an objective to fulfill the demands of our clients, we are engaged in manufacturing a widearray of Vertical Radial Locking Autoclave.FEATURES:
Inner chamber, outer chamber & support ring are fully made of stainless steel.
Heaters cover stand & carrier/bucket are made of stainless steel.
Lid made of thick machined stainless steel plate.
Radial locking lid ensures user safety & safe locking.
Lid is fitted with Pressure Gauge, Spring loaded safety valve, double safety valve,manual exhaust valve, vacuum breaker as a safety device & water level indicator.
Drain valve facilitates easy cleaning of the chamber.
Molded joint less silicone rubber gasket.
All internal joints are argon arc welded, ground & polished to give crevice free internals.
Miniature circuit breaker for mains on/off plus safety of control panel.
Industrial grade energy efficient heaters reduce power bills drastically.

• Item Code: SSE-49
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK
• Packaging Details: PACKED IN WOODEN CARRAT

Temperature

All units provide temperature range5 DegreeC above ambient to 250 DegreeCwith accuracy of +-2 DegreeC. Temperature is controlled with mechanical temperature control (rotary knob) or by digital control (PID controller). For uniform rotation of heat inside the chamber noise-less fan is used for air circulation.

Construction

Each hot air oven is produced with double walled construction and made of 304 grades stainless steel with insulation of mineral wool for efficient thermal loss. In economical models, exterior chamber is made of powder coated MS, while 304 stainless steel is used as an option. Inner chamber is completely made of stainless steel, which is easy to clean and maintain. Shelves are made of painted steel and can be easily adjusted inside the chamber with ribs created inside the interior chamber walls.

Doors

Doors are double walled, made of MS steel (stainless steel optional) and also fully insulated with mineral wool, fitted on heavy hinges. Sturdy handle provides comfortable opening and closing. Doors open 180 Degree in order to provide enough access to the heating chamber.

Heating Elements

For efficient heating, our hot air ovens are fitted with branded heating elements, nickel / chrome plated nichrome wire, kept inside the beads and placed at the bottom and both sides of the chamber.

Ventilation

For safe removal of hot gases and fumes air ventilators are provided near the top of the both sides.

Safety Features

For safe operation of the unit, several safety instruments are fitted; automatic circuit breaker turns off the unit in case of over temperature and other short circuits. Audio and visual alarms can be fitted as option, alert the user if temperature goes beyond the selection.

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 1 WEEK

We deal in best quality scientific equipments all across world also we ensure all variety of scientific glass equipments 

Laminar Flow Cabinet it is used in Laboratory to cover machine.We deal in best quality scientific equipments all across world also we ensure all variety of scientific glass equipments 

The rotary microtome is the most common instrument found in a histology laboratory. Specially designed for precise sectioning of tissue up to 1 micron thickness, it has a front located feed indicator with CAM Drive SYSTEM for accurate feed setting from 1-50 microns in step of 1 micron each. The microtome razor is fabricated from imported fine grain steel alloy tested for micro structures and the razor is heat treated to maintain optimum strength and sharpness

 

Key Features:

 

ü  Conveniently located Feed Indicator

ü  Automatic feed release mechanism

ü  Convenient Specimen holder

ü  Safety device

ü  Smooth Drive wheel with locking

ü  Vibration & shake Proof Operation

ü  Minimal Maintenance

ü  Reduced Hand Stress

ü  Sturdy, Rigid Construction

ü  Protective cover for easy cleaning & lubrication

Features:

• This unit is designed for finding out accurate disintegration time of tablets as per IP/USP standard
• Most useful for quality control and research and development laboratory of pharmaceuticals industries
• The housing made of M.S duly finished in epoxy powder coated shade in regular Model
• The heating housing made of S.S having S.S heating plate in GMP model which can accommodate 1000ml beaker
• A basket having 6 glass tube and guided discs moves up and down 30 times per minutes
• The heating plate temperature can be controlled by microprocessor temp Controller with digital timer
• Selection of hot plate or water bath type model

Features:

• To test channel point of gear oil at low temperature
• The unit for low temperature as per I S 1118-1957
• A cylindrical test jar made of 1.6mm copper seamless tubing of 90mm dia and 112.5 mm height
• The ground flat mild steel 6 nos. strip of 150 mm L x 19 mm W x 3 mm thick provided
• The thermometer of range -80c to +20c having gradation of 1c and confirming the specification of test is provided.
• The cooling bath of temperature range up to -70c provided
• The bath consist newly designed cascade type cooling system
• The temperature of bath is being controlled by solid state electronic temperature controller having digital temp. Indicator

We deal in best quality scientific equipments all across world also we ensure all variety of scientific glass equipments