Laboratory Instruments

• Pharmaceutical industry
• Food Industry
• Biotechnology Industries
• Hospitals
• Tissue culture
• Microbiology, bio fertilizer laboratories and research institutes

Most useful for growing culture of micro organisms and tissue cells.

• This bench top shaker is a compact unit designed to provide uniform shaking motion.

• The housing made of M.S /G.I sheet duly finished in epoxy power coated shade having

cushioned feet to prevent creeping.

• The platform made of S.S having S.Sclams provide to hold the flask .with DIGITAL speed RPM

indicator.

• Counter balance drivemechanism ensures smooth vibration free opration.the shaking speed is

adjustable from 50 to 200 RPM.

• Selection for multiple S.S platform to use Erlenmeyer flask, rack, beaker or bottle.

• Choice from standard MODEL or cGMP MODEL having S.S.304 housing.

• Heavy duty large size furnace is designed to meet large production facility in the filed of ceramic  firing heat treatment , materials  testing etc
• Sturdy angle frame construction having M.S heavy gauge  exterior wall finish in epoxy powder coated shade
• Long lasting ‘kanthal’ A-I heating element provided in refractory lining all 4 sides for excellent uniformity
• The temperature is being  controlled  by microprocessor based auto turning temp controller having dual indication of set and  process temperature
• A built in venting system on top
• A special solid state  over temperature safety fuse protects the elements in case of over                                                                  
• A special ceramic fiber insulation make the heat loss very low.

• Double walled fully wedded inner 136L& exterior 316S.S matt finish
• Specially designed long lasting refractory  type elements
• Microprocessor based PID temp. controller with pt—100 as a sensor
• Selection for pump or stirring assembly.
• Selection of lid for beaker,flask,dye pot rack or calibration well
• Usable as circulator & immersion test.
• Temperature range: above ambient to 250??c.

• Most useful for standard serological test including V.D.R.L test
• Sturdy heavy based housing – finish with epoxy powder coated shade
• Single speed 30 RPM
• With DIGITAL to choose time from 1 to 15 minute.
• Single speed model.
• Usable with flat bottom flask , beaker and disc. 

• Specially designed for all type of glass ware drying
• Triple walled in construction with inner made of 304 stainless steel  & exterior G.I powder coated shade in regular model.
• Inner 316L S.S mirror finish and exterior also  304 S.S matt finish in GMP MODEL.
• Heating element clamped two sides for prefect drying  no elements at bottom
• Air circulation being performed by motorized blower
• Selection of controller solid state DIGITAL controller or microprocessor PID controller with printer port.

• Designed to provide pyrogem free distilled water easily.
• Complete unit made of stainless steel.
• Condenser can be opened easily for periodic cleaning .
• The lid perfectly rest and get sealed inside the collar on head. of the tank which avoids loss of steam and jumping of lid.
• Easy wall mounting – no plumbing.
• Easy replaceable heating elements.
• Wide range of output.

• Tank is double walls inner and outer made of stainless – steel 304 quality.
• High quality glasswool insulation filled between the walls.
• Condenser made of stainless – steel – 304.
• High quality kettle elementsor refractory type elements.
• Wide range of capacity/ accurate output.

• Most suitable for all type of digestion and distillation.
• Sturdy stand structure  having powder coating finish and quite heavy duty to hold complete assembly  perfectly
• Two heater housing box for digestion base plate to get quick heating
• 250ml. 500ml.or 800ml. flask can be used.
• Condenser rack made of brass for water circulation in condenser.
• Fume duct pipe made if S.S for driving away fumes.
• Operates on 230 volts

Ideally designed for storage of storage of  blood components, serum, vaccines and medicines.

• Double walled inner S.S .304 and exterior G.I epoxy powder coated  finish
• 4”puf insulation to minimize heat – ezchange.
• Interior 316L S.S and exterior 304 S.S matt finish in GMP model
• Recessed adjustable temperature control and digital display
• Cooling kit insulation hermetically sealed compressor ,fan- motor ,condenser CFC free system
• Highly insulated front opening door with silicone gasket having losable handle
• S.S wire mesh shelves and S.S lockable drawers in different model

Specially designed for  storing of serum, vaccines pharma – samples &clinical samples

• Rugged 304 stainless steel   interior &exterior G.I epoxy powder coated  finish in regular model
• Interior 316LS.S and exterior 304 S.S matt finished in GMP MODEL
• Adjustable temperature control with DIGITAL indicator
• Cfc free cooling system  includes hermetically sealed compressor, fan – motor and condenser.
• PUF insulation for low energy consumption
• Magnetic gasket seal ensures  door sealing with adjustable hinges to open the door as per required height
• Various sizes for selection.

• Most suitable designed for digestion process.
• M.S / G.I housing duly finished in epoxy powder coated shade
• Fiber glass surface heating
• Separately attached control panel prevent heat transfer to control system.
• Fume exhaust pipe made of S.S with holding clamps to drive away fumes.
• Available in 50ml and 100ml capacity for selection
• Operates on 230 volts A.C.

• Useful for quick heating which save extraction time
• Fiber glass hand knitted heating surface heaving nichrome box
• Housing made of M.S./G.I sheet duly finished in epoxy powder.
• Control panel is separate but att
• Wide range of capacity and flask recesses for selection
• Two vertical & two horizontal rods with boas heads for necessary clamping of rods. 

• Multiple use for all requirement of pathological micro biological ,chemical physical and in other laboratories
• Double walled –inner S.S .buff finish and exterior of G.I/ M.S having epoxy powder coating finish- in regular model
• Inner 316 S.S & exterior 304 S.S matt finish in GMP MODEL
• Choice of controller from capillary type thermostat or solid state digital tem. Controller
• High precision cGMP model includes single speed stirrer PID controller round edges corner &elegant in design.
• Temp. range :-5c above  ambient to 95c
• A perforated false bottom in all bash  and choice for accessories to select
• Operates on 230 volts

• Made of thick gauge stainless – steel walled  
• Long lasting kettle element.
• With constant water-level device
• Usable with round bottom  flask – 50 ml to 500 ml capacity.
• Selection of regular & high precision model.
• High precision model designed with seamless heavy gauge 316LSS. And round edge smooth Corners.
• The lid is having 6 or 12  holes with concentric rings
• Useful for boiling and general purpose works
• Operates on 230 volts.

• Ideal for tissue metabolism and enzyme studies requiring reciprocal shaking under controlled temperature condition.
• An insulated bath chamber having inner 304 stainless – steel and  exterior of G.I/M.S epoxy power
• Coating finish – in regular model.
• Solid state control circuits for temperature and digital readout.
• Speed of stroke adjustable from 50 RPM to 200 RPM by speed controller.
• Digital timer of 24hrs with alarm included in panel.
• Inner chamber 316L and exterior 304 S.S matt finish in GMP model
• All models are with digital temp. Controller and selection for microprocessor controller.
• Cooling shaking bath includes hermetically sealed compressor, condenser, fan motor eyc, for temperature down upto 0 c.
• Stainless steel shaking  platform having  perforation and suitable for Erlenmeyer flask or test tubes
• Gable cover to prevent splash at higher speed.

• All water baths are double walled in construction.
• Inner 304 S.S.& exterior S.S 304 in GMPMODEL.
• High grade glass wool insulation between the walls.
• Selection of controller hydraulic thermostar or solid – state digital temp. Controller.
• With lid and perforated false bottom.
• Usable with round bottom flask.
• Operators on 230 volts A.C.

• Double walled – filled with high grade glass wool insulation between the walls
• Exterior of M.S/ giddily finished in epoxy power coated shade in regular model
• Selection of controller- either hydraulic thermostat,solid –state digital indicating
• Controller or microprocessor based PID controller
• GMP model having inner 304 and exterior 304 S.S matt finish
• Selection of regular and GMP model
  
• Long –lasting u type water heater.
• Temperature range :- 5c above ambient to 70c
• Operators  on 230 volts

• Double walled inner of stainless steel.
• Exterior of G.I sheet duly finished in epoxy power coated shade in regular model.
  
• Highly insulated between two walls.
• Selection form three controllers hydraulic thermostat,solid – state Digital controller or                            
• Microprocessor based PID temp. Controller.
• Concentric rings to use flask from 50 ml capacity.
• Selection from Regular, GMP model and high precision c GMP Model.
• GMP model having inner 304& exterior 304 S.S matt finishes

This unit provides facilities for both a heating in bath and stirring through magnetic linkage system.

A of temperature controller – energy regulator or solid state digital temperature controller.

• Unit with maintenance free motor and improved magnetic fields that keep stir bars moving even in high viscosity fluids.
• For stirring and heating  up to four /six 500 ml vessels simultaneously
• Provides variable speed stirring  up to 1200 RPM and temperature up to 200c easy re-set for re-setting the Teflon stirring bit in case of slip without disturbing  the speed control knob
• Pilot light illuminates when unit is heating
• Selection of common hot plate model OR individual hot plate.

• Low profile ,with maintenance free fully solid state magnetic stirrer
• For stirring up to 1000ml six or twelve vessels simultaneously variable
• Built in soft start and re- start facility with steoless variable speed control
• Centering marks provided for positioning of vessels
• Smooth surface easy to clean
• Choice of common speed control or individual speed control
• Operates on 230 volts.

• A compact but powerful magnetic  stirrer unit
• Usable with beaker vessel OR flat  bottom flask.
• Housing and top made of stainless – steel.
• A variable speed – controller.
• Stirring is accomplished by a small Teflon coated magnetic paddle
• Wide range for selection
• Operates on 230 volts.

• Double walled inner made of 316L stainless – steel mirror finish and exterior made of 304 S.S. matt finishes.
• High quality wool insulation between the walls to minimize heat – loss.
• Selection of controller – solid state  DIGITAL or microprocessor based PID with centronic port or without centronic port
• A full insulation door with silicone gasket for perfect sealing, having key lock- handle.
• Air circulation performend by motorized blower firmly installed at bottom of the unit.
• Removable shelves made of S.S 316 wire mesh
• Temp.accuracy: 0.5 c.

• A perfect choice for uniform high temperature large capacity application.
• Designed for fast moisture determination or analysis  of solid, ideal for food pharmaceuticals ,biological environmental and industrial material also useful for production of semi conductors or storage of vacuum tubes  and electronic components where contamination cannot be tolerated.
• Chamber constructed of heavy gauge type 304 stainless steel & exterior of G.I/M.S sheet finished in epoxy powder coated shade
• Solid state electronic temperature controller with digital indicator
• The heat tempered glass window allow observation of test.
• A vacuum gage that reads 0to 30” HG and two valves – one for evacuating the chamber and other for perging or for flushing
• Temperature range : 50c to 200c with accuracy :±2c
• Silicon gasket – long lasting and perfect easy sealing of door.

• Most dependable and economical budgeted priced
• Chamber made of heavy gauge stainless steel year of corrosion resistant
• Exterior of M.S/GI sheet finish in epoxy powder coated shade
• Heat treated glass window leaves clear content view.
• Silicone gasket and positive door latch assure tight seal at all vacuum levels
• Choice of temp.  controller from solid state digital temp. controller or microprocessor based PID controller.
• Two needle valves – one for vacuum and the other for flushing or inlet.
• Maximum vacuum up to 30” hg.

• Triple walled in construction with inner made of stainless – steel – 304 and exterior of G.I/M.S sheet duly finished in epoxy powder coated shade.
• High quality compressed glass wool insulation between inner wall and outer wall to prevent heat – loss.
• A fully insulated door with sturdy brass- S.S hingers with spring ball type latch and gasket for perfect sealing.
• Choice of solid- state controller with digital indicator or microprocessor based PID controller
• Selection from regular gravity convection or unit with air circulation by motorized blower
• Available with galvanized wire mesh shelves or choice to select S.S wiremsh shelves.
• Temp. Range:- 5 cabove ambient to 250c.

• Specially designed for pharmaceuticals, biological and food industries.
• Chamber made of 316S.S plate and exterior made of 304 matt mesh
• A full length toughened glass inside  the door  having window at center for test observation
• Choice of controller- solid state DIGITAL temperature controller  or  microprocessor based PID with printer output
• A 316 S.S vacuum valves – for evacuating and perging
• All controls grouped on top and front mounted for easy access
• Temp. Range: 50 c to200 c. Vacuum range: 1”Hg to 30”Hg.

• Double walled in construction with inner made of 316L stainless – steel and exterior made of 304 S.S matt finish
• High grade wool insulation provided between the walls to minimize heat – loss
• Solid state digital temp. controller or microprocessor based PID temp. Controller for selection
• Specially designed 316 S.S vacuum valve for evacuating and perging
• Temp. range: 50c to 200c with temp. Accuracy :±1cto 2c vacuum range: 1” to 30”hg
• Toughened glass door having window for observation of test
• Long lasting silicone gasket for perfect sealing of door.

• Reliable, convenient method of steam sterilization
• Sterilizing cycle terminal venting and drying cycle are automatically controlled by 0 to 60 minute digital timer.
• High grade 304 stainless steel chamber and exterior epoxy powder coated finish
• Audible and visual alarms indicated sterilization cycle interruption
• Control panel includes pressure gauge, digital temp. Indicator.
• A low water cut- off protects heating elements.

• Double walled inner made of heavy gauge 304 stainless steel &exterior also 304 S.S matt finish.
• High grade insulation between the chamber
• Selection of both side  door opening or single door
• Regular DIGITAL controller or multi program PID controller having printer output
• Equipped with pressure gauge ,two safety valves , manual exhaust valve and vacuum  breaker
• Available  with trays , rack and trolley 

• Double drum high pressure construction
• The jacket, chamber and exterior wall made of 304 stainless steel.
• The lid consist pressure switch 2 nos. safety valve, 2 nos. steam release valve and pressure gauge.
• Microprocessor based temperature controller and DIGITAL timer
• Solid state water level controller
• Removable stainless wire mesh carrier.

• Quick surface heating save extraction time.
• Housing made of M.S/G.I sheet duly finished in epoxy powder coat shade
• The control panel is separate from heating zone but in built with the main housing aluminum casted plate for quick and uniform heating
• With adjustable cross rods and boss heads to fix – up for condenser assembly.
• Selection of 4 flask unit or 6 flask unit.
• Operates on 230 volts A.C

• Advance design structure of M.S pipes with epoxy powder coating finish.
• Heating box made of M.S/G.I duly finished in powder coated shade.
• Control panel separately attached to the main housing.
• Open type spiral heater fitted in porcelain  plates
• Condenser rack made of brass- chrome- plated provided for circulation of water of condenser
• Energy regulator as a temp. controller
• Suitable for 500ml and 800ml cap. kjeldahl flask
• Operator of 230 volts

• Specially designed to suit the requirement of various field like education ,metallurgical magnets and material testing laboratory
• Housing made of heavy gauge M.S duly finished in epoxy powder coated shade
• High grade silica boards and layers of ceramic insulation provided to minimize the heat loss.
• Silicon carbide heating elements provided in refractory type heating chamber for superb temperature I uniformity.
• The temperature is being controlled by microprocessor based auto tuning temperature controller having digital  indicator
• The control panel consist main temp. controller (SCR power controller )MCB,HRC fuse etc. and mounded at one side of the  unit
• Optional programmable controller with thyristor for soft start 

• Triple walled having chamber made of stainless- steel 304 with exterior of G.I/M.S.sheet duly finished in epoxy powder coated – shade
• In between middle and outer wall- filled with best quality glass – wool to minimize heat exchange
• A full length inner glass door for test observation and insulation outer door having S.S inner lining,fitted on sturdy S.S or brass- chrome- hinges
• Available with solid- state digital temp. Controller or selection of microprocessor based PID temp. controller
• A model of regular gravity conventional or with motorized air circulation blower for selection.
• With standard galvanized wire mesh shelves or to select S.S wire mesh shelves too.
• Temperature range: - above ambient to 60 c. Temp. Accuracy: ±0.5c.

• Double walled – innerbuff finish & exterior of G.I./M.S. with epoxy powder coated finish.
• A gap between two walls occupied by compressed glass wool.
• Choice to select – solid  digital controller or microprocessor based PID controller
• Selection available forgravity convectional or with air circulation by motorized blower.
• The outer door is insulation  having inner S.S lining, fitter on brass chrome plated hings
• To be operated on 230 volts A.C

• Double walled in constrction with inner made of 316L mirror finish & exterior made of 304 S.S matt finish.
• High grade wool / PUFF insulation between the wall to minimize the heat –exchange.
• Choice to select -solid –state DIGITAL temp. Controller or microprocessor based PID temp. Controller with centronic port for printer output or without centronic port.
• Air circulation being performed by motorized blower firmly install at the bottom of the unit .
• A full lenghtinner glass door made with S.S frame provided for observation  of test.
• Removable S.S 316 wire mesh shelves provided
• Double walled insulation door – fitted on S.S hinges.
• Temp. Range: above ambient to 70c.
• Temp. accuracy :±0.2c

• Most useful for growing culture of micro organisms and tissue cells
• This bench top shaker is a compact unit designed to provide uniform shaking motion
• The housing made of m. S /g. I sheet duly finished in epoxy power coated shade having cushioned feet to prevent creeping
• The platform made of s. S having s. Sclams provide to hold the flask . With digital speed rpm indicator
• Counter balance drivemechanism ensures smooth vibration free opration. The shaking speed is adjustable from 50 to 200 RPM
• Selection for multiple s. S platform to use erlenmeyer flask, rack, beaker or bottle
• Choice from standard model or cgmp model having s. S. 304 housing

• Double  walled inner made of aluminium finished in blank powder coating shade
• Filled with glass wool insulation  between to walls.
• Selection of energy regulatpr or solid state digital temp. controller.
• Operates on 230 volts A/C.
  

• Double walled inner made of aluminium finished in blank powder coating shade
• Filled with glasswool insulation between to walls.
• Selection of energy regulatpr or solid state digital temp. controller.
• Operates on 230 volts A/C.

_{^{DRY HEAT STERILIZER CLASS:-}}

• Specially designed for sterilizing ampoules, vials and bottles.
• Microprocessor based programmable temperature controller
• Round corner 316L stainless steel chamber and exterior 304 S.S matt finish
• Heap filters at air intake, exhaust and re- circulation air flow to ensure a class – 100 environment
• Effective door sealing by food grade silicone gasket
• RS- 232/ RS 248 port for computer interface – data storing and documentation procedures
• Independent safety temperature controller to protect the process incase main control fails
• • Temp. range :5c above ambient to 200c

• Newly developed photo stability chamber to meet ICH compliant and illumination in
• accordance with ICH- QIB option – 2 & 1 guidelines.
• High reflectivity stainless steel 316L interior 304 S.S matt finish in c GMP or G.I powder finish in standard MODEL
• Microprocessor based PID temperature and optional humidity % RH controller with dual digital indicator .
• Temp. range: 10c to 40c with accuracy ±0.5c
• Microprocessor light expose control lighting energy available amounting 1.2 w X 1000000 L x hour with UV energy – 200 watt hour
• CFC free cooling system includes hermetically sealed compressor , condenser, fan motor
• Motorized exhaust to remove out heat air generated by the tube light
• Optional communication software for data management
• • Safety inter lock door switch to prevent accident UV exposure

• Ideally suited for stability and shelf life testing applications
• Highly quality S.S 316 modular panel having PUF insulation – easy to assemble at site
• Microprocessor based PID temperature & humidity % RH controller with DATA STORAGE unit
• having centronic port for printer output
• Environment friendly – CFC free refrigeration system – includes hermetically sealed
• compressor, fan motor, condenser etc, and are safely placed at back or side of the unit for
• easy servicing
• Humidification through steam injection with boiler and reservoir tank- having electronic
• water level controller with alarm
• An independent re- settable safety placed at back or side of the unit for easy servicing
• Humidification through steam injection with boiler and reservoir tank – having electronic
• water level control with alarm
• An independent re settable safety controller with digital indicator
• Capacitance type humidity sensor to control humidity directly in %RH
• • Software for data management

• ^{Affordable ,rugged portable meter for routine PH measurements}
• ^{Easy to read RED” LED” display –3 ½ digit.}
• ^{Range :PH 0.000 to 14.00 ph mv: 0 to 1999 mv}
• ^{Solid ±0.01 PH readability and MV readability and MV readability 1 MV}
• ^{Temp. compensation :manually , adjustable setting on calibrated dial between 1??c to 100??c}
• ^{Auto mode compensation in ATC model}
• • ^{Input impedance: 10/12 ohms.}