Shamboo Scientific Glass Works

We are the Manufacturer and supplier of Foggers for hospitals, ULV Foggers in India and abroad.

Fogger is a liquid ULV fogger suited to the application of spraying water & oil based

liquids in fine particle form for disinfection, pest/germ/odour control applications etc.

The fogger runs on a high speed FHP Motor that provides maximum thrust of spray,

suitable for fogging. All models are portable products. Entire body is made of

Aluminium Alloy and internal components are made of S.S. & Engg. Plastic to resist

corrosion and chemical attack. The storage tank ranges from 6.5 Ltrs. (SS316L grade) To

7.5 Ltrs. (HDPE grade), sufficient enough to dispense chemical combinations in various

proportions. EASYFOG is thus an ideal unit for all fogging applications.

Applications

Aerial disinfection of enclosed areas like hospital O.T.s & I.C.U.s, General treatment for

Pest / Germ control, Disinfection of microbial germs at Pharma Labs & R&D Centres,

Odour control at various process units, At Storage houses etc.

Technical Specifications:

Timer Device : Electronic Timer - Adjustable (5 ~ 60 minutes)

Design : Portable

Particle Size : 1 ~ 40+ Microns (Controllable from Dry fog ~ Wet fog)

Tank Capacity : 6.5 Ltrs. (SS316L grade / HDPE)

Power Input : 230VAC / 5 Hz, Single Phase

Liquid Flow Rate : 1~18 Ltrs./Hr.(Adjustable) Optional: 1~5 Ltrs./Hr.

(Adjustable)

Particle Throw : Visible upto 15 ~ 20 Fts. & more

Area Coverage : > 10000 cubic. fts. (Uniformly with ROTOSTAND)

Motor Speed : 20,000 RPM (approx.)

Dry Weight : 6 ~ 7 Kgs.

Packing Dimensions: 15 X 15 X 18 Inches

Additional Information:

• Production Capacity: 100 PCS
• Delivery Time: 1-2 WEEK
• Packaging Details: PACKED IN CORRUGATED BOX 5 PLY

• Tank is double walls inner and outer made of stainless – steel 304 quality. 
• High quality glasswool insulation filled between the walls.  
• Condenser made of stainless – steel – 304. 
• High quality kettle elementsor refractory type elements. 
• Wide range of capacity/ accurate output.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: cardboard packing.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: Card board packing.

• Made of thick gauge stainless – steel walled 
•  Long lasting kettle element. 
• With constant water-level device 
• Usable with round bottom flask – 50 ml to 500 ml capacity. 
•  Selection of regular & high precision model. 
• High precision model designed with seamless heavy gauge 316LSS. And round edge smooth 
•  Corners. 
• The lid is having 6 or 12 holes with concentric rings 
• Useful for boiling and general purpose works 
•  Operates on 230 volts.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: cardboard packing.

• Designed to provide pyrogem free distilled water easily. 
•  Complete unit made of stainless steel. 
• Condenser can be opened easily for periodic cleaning . 
• The lid perfectly rest and get sealed inside the collar on head. of the tank which avoids loss of steam and jumping of lid. 
•  Easy wall mounting – no plumbing. 
• Easy replaceable heating elements. 
• Wide range of output. 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: Cardboard packing.

• All water baths are double walled in construction. 
•  Inner 304 S.S.& exterior S.S 304 in GMPMODEL. 
• High grade glass wool insulation between the walls. 
• Selection of controller hydraulic thermostar or solid – state digital temp. Controller. 
• With lid and perforated false bottom. 
• Usable with round bottom flask. 
• Operators on 230 volts A.C

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: Cardboard packing.

• Double walled inner made of 316L stainless – steel mirror finish and exterior made of 304 S.S. matt finishes. 
• High quality wool insulation between the walls to minimize heat – loss. 
• Selection of controller – solid state DIGITAL or microprocessor based PID with centronic port or without centronic port 
•  A full insulation door with silicone gasket for perfect sealing, having key lock- handle. 
• Air circulation performend by motorized blower firmly installed at bottom of the unit. 
•  Removable shelves made of S.S 316 wire mesh 
• Temp.accuracy:±0.5˚c

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

Additional Information:

• Item Code: SSE-DK
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: IGI NEW DELHI
• Delivery Time: 10-12 DAYS
• Packaging Details: PACKED IN CORRUGATED BOX

•  Round shape plate.
• Top plate over hangs by supporting m.s. pillers witch ensures air insulation between plate and control compartment keeping control compartment cool
• Body made of thick mild steel /G.I. sheet duly finished in epoxy power coated shade in regular MODEL.
•  Body made of stainless – steel & plate also made of S.S in GMP MODEL.
• With energy regulator and three heat control switch.
•  Max. Surface temperature: - 300˚c.
• Operates on 230 volts A.C.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

• Plates are in rectangular shape. 
•  Top plate over hangs by supporting M.S. pillars allows air insulation between plate and control compartment to keep control compartment cool 
• Long lasting nichrom elements. 
• Body made of thick mild steel /G.I sheet duly finishing in epoxy power coated shade in 
• Regular MODEL. 
• Body made of stainless - steel & plate also made of S.S in GMP MODEL. 
• With energy regulator and three heat control switch. 
• Max. Surface temperature :- 300˚c. 
• Operstes – on 230 volts A.C.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

• Triple walled in construction with inner made of stainless – steel – 304 and exterior of G.I/M.S sheet duly finished in epoxy powder coated shade. 
•  High quality compressed glass wool insulation between inner wall and outer wall to prevent heat – loss. 
•  A fully insulated door with sturdy brass- S.S hingers with spring ball type latch and gasket for perfect sealing. 
•  Choice of solid- state controller with digital indicator or microprocessor based PID controller 
•  Selection from regular gravity convection or unit with air circulation by motorized blower 
• Available with galvanized wire mesh shelves or choice to select S.S wiremsh shelves. 
•  Temp. Range:- 5˚cabove ambient to 250˚c. 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK

•  Double walled in constrction with inner made of 316L mirror finish & exterior made of 304 S.S matt finish.
•  High grade wool / PUFF insulation between the wall to minimize the heat –exchange.
• Choice to select -solid –state DIGITAL temp. Controller or microprocessor based PID temp. Controller with centronic port for printer output or without centronic port.
• Air circulation being performed by motorized blower firmly install at the bottom of the unit .
• A full lenghtinner glass door made with S.S frame provided for observation of test.
• Removable S.S 316 wire mesh shelves provided
• Double walled insulation door – fitted on S.S hinges.
• Temp. Range: above ambient to 70˚c.
• Temp. accuracy :±0.2˚c

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOAD PACKING.

• Most useful for growing culture of micro organisms and tissue cells. 
• This bench top shaker is a compact unit designed to provide uniform shaking motion. 
• The housing made of M.S /G.I sheet duly finished in epoxy power coated shade having cushioned feet to prevent creeping. 
• The platform made of S.S having S.Sclams provide to hold the flask .with DIGITAL speed RPM indicator. 
•  Counter balance drivemechanism ensures smooth vibration free opration.the shaking speed is adjustable from 50 to 200 RPM. 
•  Selection for multiple S.S platform to use Erlenmeyer flask, rack, beaker or bottle. 
• Choice from standard MODEL or cGMP MODEL having S.S.304 housing. 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

• Double walled in construction - highly insulated between two walls high quality glasswool. 
• Interior of 340 stainless steel having buffed – finish. 
• Exterior of G.I./M.S duly finished in grey powder coated shade 
•  Selection of controller – solid – state digital temperature controller or microprocessor 
• based PID temp. Controller. 
• A fully instulament door with sturdy brass/S.S. hinges.with spring ball type or magnetic latch. 
•  Choice for grlvanized wire mesh as a standard or S.S wire mesh at extra cost. 
• Temp. Accuracy: ± 1˚c.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

With vast experience and knowledge we are involved in offering an extensive range of Mortuary Chamber. These are highly reckoned among our clients due to their fine quality, high durability and long life. These are manufactured using fine quality material as per the set industrial standards. Moreover, we also assure to deliver a defect free range of our products in a fixed time frame.

Features:

• Cost effective
• Quality approved
• Fine finish

• Double walled – innerbuff finish & exterior of G.I./M.S. with epoxy powder coated finish. 
•  A gap between two walls occupied by compressed glass wool. 
•  Choice to select – solid digital controller or microprocessor based PID controller 
• Selection available forgravity convectional or with air circulation by motorized blower. 
• The outer door is insulation having inner S.S lining, fitter on brass chrome plated hings 
• To be operated on 230 volts A.C 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

• Highly accurate designed bath. 
• Double walled inner 304 S.S. mirror finish and exterior also made of S.S.304 matt finish. 
•  High grade PUFF insulation to minimize the heat exchange. 
•  Microprocessor based PID temperature controller with dual DIGITAL indicator for SET & process value. 
•  Consist with pump cum stirring assembly for model of viscometer. 
• Selection for heating or cooling model 

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK
• Packaging Details: CARDBOARD PACKING.

We have wide range of Lab Manometer. These are used to measure atmospheric pressure. Owing to their modern and user friendly features, these are widely used in various schools, colleges, laboratories and other places.